10 - 6
Programming Chart inside the back cover, then scanning Save. Default = 4000 ms, which is 4 seconds.
Note: If the EAS tag has not been deactivated in this time period, the operator can deactivate it using the F1 button.
See EAS Function on page 4-5 to program this functionality.
EAS Tag Detection
When On is scanned, the scanner makes a Geiger counter sound when an EAS tag is detected. Scan the Off bar code(s) if you
don’t want the scanner to make this sound. Default = EAS Tag Detection Off.
Note: To set the scanner to chirp when an EAS tag is deactivated, refer to Beep on EAS Deactivation on page 4-11.
EAS Interlocked Duration
Timeout
To Next Page
Loading...
