Note: Cutout wall must not contact the platter.
Keep connector areas
free from obstructions
Additional structural support may be
required for thin countertops. 2 “L” brackets,
maximum length 11.25 in. (286mm) each,
may be used instead of a routed edge.
.367 in.
9.33mm
.750 in.
19.05mm
1.5 in.
38.1mm
1.375 in.
34.93mm
Max Both Sides
Support Brackets
4.1 in.
104.13mm
Cutout Width
11.625 in.
+ .062
295.28mm + 1.59
Cutout Length
20.12 in. + .062
511.18mm + 1.59
Support brackets
13.94 in.
354mm
To Next Page
Loading...
