Honeywell Stratos 2700 - Page 239

13 - 21
EAN/JAN-8 Addenda *2 Digit Addenda Off EA8AD20 9-51
2 Digit Addenda On EA8AD21 9-50
*5 Digit Addenda Off EA8AD50 9-51
5 Digit Addenda On EA8AD51 9-51
EAN/JAN-8 Addenda Required *Not Required EA8ARQ0 9-51
Required EA8ARQ1 9-51
EAN/JAN-8 Addenda
Separator
*Off EA8ADS0 9-51
On EA8ADS1 9-51
EAN/JAN-8 Redundancy Range (0 - 10) *0 EA8VOT## 9-52
UPC/EAN Addenda Redundancy 2-Digit Addenda Redundancy
Range (0 - 10) *2
AD2VOT## 9-52
5-Digit Addenda Redundancy
Range (0 - 10) *1
AD5VOT## 9-52
MSI Default All MSI Settings MSIDFT 9-53
*Off MSIENA0 9-53
On MSIENA1 9-53
MSI Check Character *Validate Type 10, but Don’t Transmit MSICHK0 9-53
Validate Type 10 and
Trans mit
MSICHK1 9-53
Validate 2 Type 10 Chars, but Don’t Transmit MSICHK2 9-53
Validate 2 Type 10 Chars and Transmit MSICHK3 9-53
Validate Type 10 then Type 11 Char, but Don’t
Trans mit
MSICHK4 9-54
Validate Type 10 then Type 11 Char and
Trans mit
MSICHK5 9-54
Disable MSI Check Characters MSICHK6 9-54
MSI Redundancy Range (0 - 10) *0 MSIVOT## 9-54
MSI Message Length Minimum (1 - 80) *3 MSIMIN## 9-54
Maximum (1 - 80) *80 MSIMAX## 9-54
Plessey Code Default All
Plessey Code Settings
PLSDFT 9-55
*Off PLSENA0 9-55
On PLSENA1 9-55
Plessey Check Char. *No Check Char. PLSCHK0 9-55
Validate, But Don’t
Trans mit
PLSCHK1 9-55
Validate,
and Transmit
PLSCHK2 9-55
Plessey Redundancy Range (0 - 10) *0 PLSVOT## 9-56
Plessey Message Length Minimum (1 - 80) *3 PLSMIN## 9-56
Maximum (1 - 80) *80 PLSMAX## 9-56
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page