Honeywell VISTA-128BPT - Page 97

93
SECTION 4: SYSTEM LAYOUT WORKSHEETS
* The activation time of the window is randomized up to 30 minutes and is initialized by either of two methods:
a. [User Code] + [#] + [41] − Initiates the random schedule for all devices in the partition.
b. [User Code] + [#] + [42] − Initiates the random schedule for all devices in the partition with a time window within
6 PM and 5 AM.
Limitation of Access Worksheet The system provides up to eight Access Schedules that can be programmed for the
system. Fill in the required data on the worksheet below and follow the procedure in the installation instructions as you
enter the data during the displays and prompts that appear in sequence.
Acc
Mon
Tues
Wed
Thurs
Fri
Sat
Sun
Hol
Sch
W1
W2
W1
W2
W1
W2
W1
W2
W1
W2
W1
W2
W1
W2
W1
W2
1
2
3
4
5
6
7
8
Temporary Schedule #81 Menu Mode. The system provides a Temporary Schedule for each partition. Enter the
temporary scheduling mode by pressing [Installer Code] + [#] + [81]. Fill in the required data on the worksheet below and
follow the procedure in the installation instructions as you enter the data during the displays and prompts that appear in
sequence.
Partition/Windows Mon Tue Wed Thu Fri Sat Sun
1 Disarm Window
Start Time HH:MM
Stop Time HH:MM
Arm Window
Start Time HH:MM
Stop Time HH:MM
2 Disarm Window
Start Time HH:MM
Stop Time HH:MM
Arm Window
Start Time HH:MM
Stop Time HH:MM
3 Disarm Window
Start Time HH:MM
Stop Time HH:MM
Arm Window
Start Time HH:MM
Stop Time HH:MM