Honeywell Vocollect A700 Series User Manual

Error Message Solution
5. Reload VoiceClient.
"Task not loaded. No task name available."
1. Reload the task.
2. Turn the device off and then turn it back on
again.
3. Reboot the device.
4. Reload VoiceClient.
"Telnet client process failed to start."
1. Turn the device off and then turn it back on
again.
2. Reboot the device.
3. Reload VoiceClient.
"Telnet session manager failed to start."
1. Turn the device off and then turn it back on
again.
2. Reboot the device.
3. Reload VoiceClient.
"Telnet VT220 emulation process failed to start."
1. Turn the device off and then turn it back on
again.
2. Reboot the device.
3. Reload VoiceClient.
"Unable to receive input data."
1. Turn the device off and then turn it back on
again.
2. Reboot the device.
3. Reload VoiceClient.
"Unable to retrieve operator files."
1. Turn the device off and then turn it back on
again.
2. Reboot the device.
3. Reload VoiceClient.
"Unable to send output data."
1. Turn the device off and then turn it back on
again.
2. Reboot the device.
3. Reload VoiceClient.
"Unable to train words. Not enough free flash
memory."
1. Wait for the device to go to sleep.
2. Turn the device off and then turn it back on
again.
3. Reboot the device.
4. Reload VoiceClient.
"Warning, low flash memory!"
1. Go to an area of known good coverage.
61 A700x Product Guide

Honeywell Vocollect A700 Series Specifications

General

Brand	Honeywell
Model	Vocollect A700 Series
Category	Measuring Instruments
Language	English