Error Message Solution
"Invalid device Manager Service name or port."
"No task list file found. Task unchanged."
1. Reload the task.
2. Turn the device off and then turn it back on
again.
3. Reboot the device.
4. Reload VoiceClient.
"Noise sampling procedure failed."
1. Sample noise again.
2. Go to a quieter location and perform
another noise sample.
3. Try using another headset and perform the
noise sample.
NOTE
If this solves the problem, the first
headset might be damaged.
"Noise sampling procedure timed out."
1. Sample noise again.
2. Reboot the device.
"Operator load failed."
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on
again.
3. Reboot the device.
4. Reload VoiceClient.
"Power-off error."
1. Power on the device.
2. Reboot the device.
"Self test mode set, but no script file found."
Edit the task configuration file, taskname.vcf, and
change the line selftest=1 to selftest=0.
"Software error while changing task. Task
unchanged."
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on
again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
"Task load failed."
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on
again.
3. Reload the task.
4. Reboot the device.
A700x Product Guide 60
To Next Page
Loading...
Need help?
General
