Honeywell Vocollect A700 Series User Manual

Error Message Solution
4. Reboot the device.
5. Reload VoiceClient.
"Failed to write the ODR NTI registration file.
Task load failed."
1. Reload the task.
2. Turn the device off and then turn it back on
again.
3. Reboot the device.
4. Reload VoiceClient.
"Firmware error while changing task. Task not
changed."
1. Reload the task.
2. Turn the device off and then turn it back on
again.
3. Reboot the device.
4. Reload VoiceClient.
"Flash error."
1. Turn the device off and then turn it back on
again.
2. Reboot the device.
3. Reload VoiceClient.
"Flash is full. Please wait while Talkman turns
off."
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on
again.
3. Reboot the device.
4. Reload VoiceClient.
"Headset battery is getting low." Change the battery.
"Headset battery is getting low. Change headset
battery now."
Change the battery.
"Initializing operator failed. Please reload
operator."
1. Reload the operator.
2. Turn the device off and then turn it back on
again.
3. Reboot the device.
4. Reload VoiceClient.
"Internal error loading operator."
1. Turn the device off and then turn it back on
again.
2. Reboot the device.
3. Reload VoiceClient.
"Invalid operator file name." Select the operator again or load a different operator.
"Invalid device Manager Host name or address."
59 A700x Product Guide

Honeywell Vocollect A700 Series Specifications

General

Brand	Honeywell
Model	Vocollect A700 Series
Category	Measuring Instruments
Language	English