XI581/2 BUSWIDE OPERATOR INTERFACE EVERYDAY OPERATIONS
45 EN2B-0126 (74-3554-8)
DIO Module Assignment
Address: 04
Unassign ▲
▲▲
▲
! XFL522 0001FC234088 1
XFL522 0001FC334056 ■
* XFL522 0001FC234062 ▼
Special characters indicate the module status according to the following key:
! An exclamation mark indicates that the module was previously assigned to this
controller in CARE but is now being used by another controller.
* An asterisk indicates that the module is being used by another controller. It is
displayed because module type and address match.
A blank indicates that this module is free and can be used for assignment.
8. Select a module by using the arrow keys to move to and highlight it and then
pressing Enter (↵).
RESULT: The assignment is accepted and the first 'Distributed I/O Module
Assignment' screen is displayed again.
DIO Module Assignment
02 ? XLF521 0001FC234088 ▲
▲▲
▲
03 <Unassigned> 1
04 - XFL522 0001FC234088 ■
■■
■
05 XFL524 0001FC234062 ▼
A second method can also be used to select a module. While either the screen with
the Distributed I/O module types (result of step 6) or the screen with the found
Distributed I/O modules (result of step 7) is displayed, press the L
ONWORKS service
pin of the module being selected.
RESULT: If the LONWORKS service pin is pushed, the following screen is
displayed:
DIO Module Assignment
Module : 04 XFL522
Neuron ID: 0001FC234088
ASSIGN
9. ASSIGN is highlighted by default. Press Enter (↵) to accept the assignment or
press Cancel (C) to return to the previous screen.
RESULT: If the assignment is accepted, the first 'Distributed I/O Module
Assignment' screen is displayed again.
DIO Module Assignment
02 ? XLF521 0001FC234088 ▲
▲▲
▲
03 <Unassigned> 1
04 - XFL522 0001FC234088 ■
■■
■
05 XFL524 0001FC234062 ▼
To Next Page
Loading...
