HP 5900 - Accounting Command; Accounting Default

Related commands
display domain
accounting command
Use accounting command to specify the command line accounting method.
Use undo accounting command to restore the default.
Syntax
accounting command hwtacacs-scheme hwtacacs-scheme-name
undo accounting command
Default
The default accounting method of the ISP domain is used for command line accounting.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
Usage guidelines
The command line accounting function cooperates with the accounting server to record all commands
that have been successfully executed on the device.
Command line accounting can use only a remote HWTACACS server.
Examples
# Configure ISP domain test to use HWTACACS scheme hwtac for command line accounting.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting command hwtacacs-scheme hwtac
Related commands
• accounting default
• command accounting (Fundamentals Command Reference)
• hwtacacs scheme
accounting default
Use accounting default to specify the default accounting method for an ISP domain.
Use undo accounting default to restore the default.
2