HP 5900 Command Reference

Syntax
password-control super length length
undo password-control super length
Default
In non-FIPS mode, the minimum super password length is 10 characters.
In FIPS mode, the minimum super password length is 15 characters.
Views
System view
Predefined user roles
network-admin
Parameters
length: Specifies the minimum length of super passwords in characters. The value range for this argument
is 4 to 63 in non-FIPS mode, and 15 to 63 in FIPS mode.
Examples
# Set the minimum length of super passwords to 10 characters.
<Sysname> system-view
[Sysname] password-control super length 10
Related commands
• display password-control
• password-control length
password-control update-interval
Use password-control update-interval to set the minimum password update interval, which is the
minimum interval at which users can change their passwords.
Use undo password-control update-interval to restore the default.
Syntax
password-control update-interval interval
undo password-control update-interval
Default
The minimum password update interval is 24 hours.
Views
System view
Predefined user roles
network-admin
150

HP 5900 Specifications

General

Model	HP 5900
Rack Mountable	Yes
MAC Address Table Size	128K
Jumbo Frame Support	Yes
Routing Protocol	OSPF, BGP, RIP, IS-IS, IGMP
Remote Management Protocol	SNMP, CLI
Features	Quality of Service (QoS), Jumbo Frames support, IPv4 support, IPv6 support
Operating Temperature	0 °C to 45 °C
Operating Humidity	10% to 90% non-condensing
Power Supply	Internal power supply - hot-plug / redundant