Field Descri
tion
Security data flow ACL referenced by the IPsec policy.
Selector mode
Data flow protection mode of the IPsec policy:
• standard
• aggregation
• per-host
Local address
Local end IP address of the IPsec tunnel (only available for the
IPsec policy using IKE negotiation).
Remote address Remote end IP address or host name of the IPsec tunnel.
Transform set Transform set referenced by the IPsec policy.
IKE profile IKE peer referenced by the IPsec policy.
SA duration(time based) Time-based IPsec SA lifetime, in seconds.
SA duration(traffic based) Traffic-based IPsec SA lifetime, in kilobytes.
SA idle time Idle expiration time of the IPsec SA, in seconds.
AH string-key AH string key (****** is displayed if the key is configured).
AH authentication hex key
AH authentication hex key (****** is displayed if the key is
configured).
ESP string-key ESP string key (****** is displayed if the key is configured).
ESP encryption hex key
ESP encryption hex key (****** is displayed if the key is
configured).
ESP authentication hex key
ESP authentication hex key (****** is displayed if the key is
configured).
Related commands
ipsec { ipv6-policy | policy } (system view)
display ipsec { ipv6-policy-template | policy-template }
Use display ipsec { ipv6-policy-template | policy-template } to display information about IPsec policy
templates.
Syntax
display ipsec { ipv6-policy-template | policy-template } [ template-name [ seq-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-policy-template: Displays information about IPv6 IPsec policy templates.
319
To Next Page
Loading...
Need help?
General
