HP 5900 Command Reference

# Display certificate request statuses for all PKI domains.
<Sysname> display pki certificate request-status
Certificate Request Transaction 1
Domain name: domain1
Status: Pending
Key usage: General
Remain polling attempts: 10
Next polling attempt after : 1191 seconds
Certificate Request Transaction 2
Domain name: domain2
Status: Pending
Key usage: Signature
Remain polling attempts: 10
Next polling attempt after : 188 seconds
Table 25 Command output
Field Description
Certificate Request Transaction number Certificate request transaction number, starting from 1.
Status
Certificate request status, including only the pending
status.
Key usage
Certificate purpose:
• General—General purpose, for both signing and
encryption.
• Signature—Used for signing.
• Encryption—Used for encryption.
Remain polling attempts
Remaining number of attempts for querying certificate
request status.
Next polling attempt after Remaining seconds for next polling.
Related commands
z certificate request polling
z pki domain
z pki retrieve-certificate
display pki crl
Use display pki crl domain to display information about the locally saved CRLs.
Syntax
display pki crl domain domain-name
Views
Any view
189

HP 5900 Specifications

General

Model	HP 5900
Rack Mountable	Yes
MAC Address Table Size	128K
Jumbo Frame Support	Yes
Routing Protocol	OSPF, BGP, RIP, IS-IS, IGMP
Remote Management Protocol	SNMP, CLI
Features	Quality of Service (QoS), Jumbo Frames support, IPv4 support, IPv6 support
Operating Temperature	0 °C to 45 °C
Operating Humidity	10% to 90% non-condensing
Power Supply	Internal power supply - hot-plug / redundant