HP 5900 Command Reference

sftp> put startup.bak startup01.bak
Uploading startup.bak to /startup01.bak
startup01.bak 100% 1424 1.4KB/s 00:00
pwd
Use pwd to display the current working directory of an SFTP server.
Syntax
pwd
Views
SFTP client view
Predefined user roles
network-admin
Examples
# Display the current working directory of the SFTP server.
sftp> pwd
Remote working directory: /
The output shows that the current working directory is the root directory.
quit
Use quit to terminate the connection with an SFTP server and return to user view.
Syntax
quit
Views
SFTP client view
Predefined user roles
network-admin
Usage guidelines
This command functions as the bye and exit commands.
Examples
# Terminate the connection with the SFTP server.
sftp> quit
<Sysname>
remove
Use remove to delete the specified files from an SFTP server.
248

HP 5900 Specifications

General

Model	HP 5900
Rack Mountable	Yes
MAC Address Table Size	128K
Jumbo Frame Support	Yes
Routing Protocol	OSPF, BGP, RIP, IS-IS, IGMP
Remote Management Protocol	SNMP, CLI
Features	Quality of Service (QoS), Jumbo Frames support, IPv4 support, IPv6 support
Operating Temperature	0 °C to 45 °C
Operating Humidity	10% to 90% non-condensing
Power Supply	Internal power supply - hot-plug / redundant