• network: Network access user, who accesses network resources through the device. Network
access users can use the LAN access service.
all: Specifies all users.
service-type: Specifies the local users who use a specified type of service.
• ftp: FTP users.
• lan-access: LAN users, mainly users accessing the network through an Ethernet, such as 802.1X
users.
• ssh: SSH users.
• telnet: Telnet users.
• terminal: Terminal users, users logging in through a console port
Usage guidelines
If you do not specify the class { manage | network } option, this command adds a device management
user.
Examples
# Add a device management user named user1.
<Sysname> system-view
[Sysname] local-user user1 class manage
[Sysname-luser-manage-user1]
# Add a network access user named user2.
<Sysname> system-view
[Sysname] local-user user2 class network
[Sysname-luser-network-user2]
Related commands
• display local-user
• service-type
password
Use password to configure a password for a local user.
Use undo password to delete the password of a local user.
Syntax
In non-FIPS mode:
password [ { cipher | hash | simple } password ]
undo password
In FIPS mode:
password
29
To Next Page
Loading...
Need help?
General
