HP 5900 Command Reference

timer quiet (HWTACACS scheme view)
Use timer quiet to set the quiet timer for the servers specified in an HWTACACS scheme.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
Default
The server quiet period is 5 minutes.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
minutes: Server quiet period in minutes, in the range of 1 to 255.
Examples
# Set the server quiet timer to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
Related commands
display hwtacacs scheme
timer realtime-accounting (HWTACACS scheme view)
Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
HWTACACS scheme view
Predefined user roles
network-admin
77

HP 5900 Specifications

General

Model	HP 5900
Rack Mountable	Yes
MAC Address Table Size	128K
Jumbo Frame Support	Yes
Routing Protocol	OSPF, BGP, RIP, IS-IS, IGMP
Remote Management Protocol	SNMP, CLI
Features	Quality of Service (QoS), Jumbo Frames support, IPv4 support, IPv6 support
Operating Temperature	0 °C to 45 °C
Operating Humidity	10% to 90% non-condensing
Power Supply	Internal power supply - hot-plug / redundant