Predefined user roles
network-admin
Parameters
seconds: Specifies the HWTACACS server response timeout time, in the range of 1 to 300 seconds.
Usage guidelines
HWTACACS is based on TCP. When the server response timeout timer or the TCP timeout timer times out,
the device is disconnected from the HWTACACS server.
Examples
# Set the HWTACACS server response timeout timer to 30 seconds for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer response-timeout 30
Related commands
display hwtacacs scheme
user-name-format (HWTACACS scheme view)
Use user-name-format to specify the format of the username to be sent to an HWTACACS server.
Use undo user-name-format to restore the default.
Syntax
user-name-format { keep-original | with-domain | without-domain }
undo user-name-format
Default
The ISP domain name is included in the username.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
keep-original: Sends the username to the HWTACACS server as it is entered.
with-domain: Includes the ISP domain name in the username sent to the HWTACACS server.
without-domain: Excludes the ISP domain name from the username sent to the HWTACACS server.
Usage guidelines
A username is generally in the format userid@isp-name, of which isp-name is used by the device to
determine the ISP domain to which a user belongs. However, some HWTACACS servers cannot
recognize a username containing an ISP domain name. Before sending a username including a domain
79
To Next Page
Loading...
Need help?
General
