HP 6125G - Page 146

135
Task Command Remarks
Display the number of PIM control
messages.
display pim control-message
counters [ message-type { probe |
register | register-stop } |
[ interface interface-type
interface-number | message-type
{ assert | bsr | crp | graft |
graft-ack | hello | join-prune |
state-refresh } ] * ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display the information about
unacknowledged PIM-DM graft
messages.
display pim grafts [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display the PIM information on an
interface or all interfaces.
display pim interface
[ interface-type interface-number ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the information of
join/prune messages to send.
display pim join-prune mode { sm
[ flags flag-value ] | ssm }
[ interface interface-type
interface-number | neighbor
neighbor-address ] * [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display PIM neighboring
information.
display pim neighbor [ interface
interface-type interface-number |
neighbor-address | verbose ] * [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display the content of the PIM
routing table.
display pim routing-table
[ group-address [ mask
{ mask-length | mask } ] |
source-address [ mask
{ mask-length | mask } ] |
incoming-interface [ interface-type
interface-number | register ] |
outgoing-interface { include |
exclude | match } { interface-type
interface-number | register } |
mode mode-type | flags flag-value
| fsm ] * [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the RP information.
display pim rp-info
[ group-address ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Reset PIM control message
counters.
reset pim control-message
counters [ interface interface-type
interface-number ]
Available in user view