HP 6125G Configuration Guide

193
Ste
p
Command
Remarks
4. Configure BGP route
dampening parameters.
dampening [ half-life-reachable
half-life-unreachable reuse
suppress ceiling | route-policy
route-policy-name ] *
Not configured by default.
Configuring MBGP route attributes
You can modify MBGP route attributes to affect route selection.
Before you configure this task, configure basic MBGP functions first.
Configuring MBGP route preferences
You can reference a routing policy to set preferences for routes matching it. Routes not matching it use the
default preferences.
To configure MBGP route preferences:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv4 MBGP address
family view.
ipv4-family multicast N/A
4. Configure preferences for
external, internal, and local
MBGP routes.
preference { external-preference
internal-preference
local-preference | route-policy
route-policy-name }
Optional.
The default preferences of
multicast MBGP EBGP, MBGP
IBGP, and local MBGP routes are
255, 255, and 130, respectively.
Configuring the default local preference
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv4 MBGP address
family view.
ipv4-family multicast N/A
4. Configure the default local
preference.
default local-preference value
Optional.
100 by default.
Configuring the MED attribute
When other conditions of routes to a destination are identical, the route with the smallest MED is
selected.
To configure the MED attribute:

HP 6125G Specifications

General

Brand	HP
Model	6125G
Category	Switch
Language	English