HP 6125G Configuration Guide

143
Upstream neighbor: 192.168.1.2
RPF prime neighbor: 192.168.1.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
Protocol: pim-sm, UpTime: 00:00:42, Expires: 00:03:06
The information on Switch B and Switch C is similar to that on Switch A.
# Display PIM routing table information on Switch D.
[SwitchD] display pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.5.100, 225.1.1.0)
RP: 192.168.9.2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:00:42
Upstream interface: Vlan-interface300
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface105
Protocol: pim-sm, UpTime: 00:00:42, Expires: 00:02:26
# Display PIM routing table information on Switch E.
[SwitchE] display pim routing-table
Total 1 (*, G) entry; 0 (S, G) entry
(*, 225.1.1.0)
RP: 192.168.9.2 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:13:16
Upstream interface: Register
Upstream neighbor: 192.168.4.2
RPF prime neighbor: 192.168.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface102
Protocol: pim-sm, UpTime: 00:13:16, Expires: 00:03:22
PIM-SM admin-scope zone configuration example
Network requirements
As shown in Figure 48, receivers receive VOD information through multicast. The entire PIM-SM domain
is divided into admin-scope zone 1, admin-scope zone 2, and the global zone. Switch B, Switch C, and
Switch D are ZBRs of these three domains respectively.
Source 1 and Source 2 send different multicast informa t i o n t o m u l t i c a s t g r o u p 239.1.1.1. H o s t A r e c e ive s
the multicast information only from Source 1, and Host B receives the multicast information only from

HP 6125G Specifications

General

Brand	HP
Model	6125G
Category	Switch
Language	English