149
# Display RP information on Switch D.
[SwitchD] display pim rp-info
PIM-SM BSR RP information:
Group/MaskLen: 224.0.0.0/4
RP: 10.110.9.1
Priority: 192
HoldTime: 150
Uptime: 00:03:42
Expires: 00:01:48
Group/MaskLen: 239.0.0.0/8
RP: 10.110.4.2 (local)
Priority: 192
HoldTime: 150
Uptime: 00:06:54
Expires: 00:02:41
# Display RP information on Switch F.
[SwitchF] display pim rp-info
PIM-SM BSR RP information:
Group/MaskLen: 224.0.0.0/4
RP: 10.110.9.1 (local)
Priority: 192
HoldTime: 150
Uptime: 00:00:32
Expires: 00:01:58
PIM-SSM configuration example
Network requirements
As shown in Figure 49, receivers receive VOD information through multicast. The receiver groups of
different organizations form stub networks, and one or more receiver hosts exist in each stub network. The
entire PIM domain is operating in the SSM mode.
Host A and Host C are multicast receivers in two stub networks.
The SSM group range is 232.1.1.0/24.
IGMPv3 runs between Switch A and N1 and between Switch B/Switch C and N2.
To Next Page
Loading...
