HP 6125G Configuration Guide

316
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter IPv6 PIM view.
pim ipv6 N/A
3. Configure the priority for DR
election.
hello-option dr-priority priority
Optional.
1 by default.
4. Configure IPv6 PIM neighbor
timeout time.
hello-option holdtime interval
Optional.
105 seconds by default.
5. Configure the prune message
delay time (LAN-delay).
hello-option lan-delay interval
Optional.
500 milliseconds by default.
6. Configure the prune override
interval.
hello-option override-interval
interval
Optional.
2,500 milliseconds by default.
7. Disable join suppression.
hello-option neighbor-tracking Enabled by default.
Configuring hello options on an interface
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the priority for DR
election.
pim ipv6 hello-option dr-priority
priority
Optional.
1 by default.
4. Configure IPv6 PIM neighbor
timeout time.
pim ipv6 hello-option holdtime
interval
Optional.
105 seconds by default.
5. Configure the prune message
delay time (LAN-delay).
pim ipv6 hello-option lan-delay
interval
Optional.
500 milliseconds by default.
6. Configure the prune override
interval.
pim ipv6 hello-option
override-interval interval
Optional.
2500 milliseconds by default.
7. Disable join suppression.
pim ipv6 hello-option
neighbor-tracking
Enabled by default.
8. Configure the interface to
reject hello messages without
a generation ID.
pim ipv6 require-genid
By default, hello messages without
Generation_ID are accepted.
Configuring the prune delay
Configuring the prune delay interval on an upstream router in a shared network segment can make the
upstream router not perform the prune action immediately after receiving the prune message from its
downstream router. Instead, the upstream router maintains the current forwarding state for a period of
time that the prune delay interval defines. In this period, if the upstream router receives a join message
from the downstream router, it cancels the prune action. Otherwise, it performs the prune action.
To configure the prune delay time

HP 6125G Specifications

General

Brand	HP
Model	6125G
Category	Switch
Language	English