HP 6125G - Configuring Inbound MBGP Route Filtering

191
Configuring inbound MBGP route filtering
By configuring MBGP route reception filtering policies, you can filter out unqualified routes from an
MBGP peer or peer group. Members of a peer group can have different route reception filtering policies
from the peer group.
If several filtering policies are configured, they are applied in the following sequence:
1. filter-policy import
2. peer filter-policy import
3. peer as-path-acl import
4. peer ip-prefix import
5. peer route-policy import
Only the routes that have passed all the configured policies can be advertised.
To configure MBGP route reception filtering policies:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv4 MBGP address
family view.
ipv4-family multicast N/A