Remarks
4. Configure the router as a
route reflector and specify an
MBGP peer or a peer group
as its client.
peer { group-name | peer-address }
reflect-client
Not configured by default.
5. Enable route reflection
between clients.
reflect between-clients
Optional.
Enabled by default.
6. Configure the cluster ID of the
route reflector.
reflector cluster-id cluster-id
Optional.
By default, a route reflector uses its
router ID as the cluster ID.
Displaying and maintaining MBGP
Displaying MBGP
Task Command
Display the IPv4 MBGP
routing table.
display ip multicast routing-table [ verbose] [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display the IPv4 MBGP
routing information matching
the specified destination IP
address.
display ip multicast routing-table ip-address
[ mask-length | mask ] [ longer-match ] [ verbose ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view
Display MBGP peer group
information.
display bgp multicast group [ group-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display the advertised
networks.
display bgp multicast network [ | { begin | exclude |
include } regular-expression ]
Available in any
view
Display AS path information.
display bgp multicast paths [ as-regular-expression | |
{ begin | exclude | include } regular-expression ]
Available in any
view
Display MBGP peer
information or peer group
information.
display bgp multicast peer [ [ ip-address ] verbose ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view
Display the prefix entries in
the ORF information from the
specified BGP peer.
display bgp multicast peer ip-address received ip-prefix
[ | { begin | exclude | include } regular-expression ]
Available in any
view
Display MBGP routing
information.
display bgp multicast routing-table [ ip-address [ { mask
| mask-length } [ longer-prefixes ] ] ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display MBGP routing
information matching the AS
path list.
display bgp multicast routing-table as-path-acl
as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
Available in any
view
Display MBGP CIDR routing
information.
display bgp multicast routing-table cidr [ | { begin |
exclude | include } regular-expression ]
Available in any
view