256
Displaying and maintaining IPv6 multicast routing
and forwarding
CAUTION:
The reset commands might cause IPv6 multicast data transmission failures.
To display and maintain IPv6 multicast routing and forwarding:
Task Command Remarks
Display the IPv6 multicast boundary
information.
display multicast ipv6 boundary
{ group [ ipv6-group-address
[ prefix-length ] ] | scope [ scope-id ] }
[ interface interface-type
interface-number ] [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display the information of the IPv6
multicast forwarding table.
display multicast ipv6
forwarding-table
[ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type
interface-number | register } |
outgoing-interface { exclude | include
| match } { interface-type
interface-number | register } |
statistics | slot slot-number ] *
[ port-info ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the information of the IPv6
multicast routing table.
display multicast ipv6 routing-table
[ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type
interface-number | register } |
outgoing-interface { exclude | include
| match } { interface-type
interface-number | register } ] * [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display the RPF route information of the
specified IPv6 multicast source.
display multicast ipv6 rpf-info
ipv6-source-address
[ ipv6-group-address ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Clear forwarding entries from the IPv6
multicast forwarding table.
reset multicast ipv6 forwarding-table
{ { ipv6-source-address [ prefix-length ]
| ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type
interface-number | register } } * | all }
To Next Page
Loading...
