HP 6125G - Resetting Ipv6 MBGP Connections; Clearing Ipv6 MBGP Information; Ipv6 MBGP Configuration Example

360
Task Command Remarks
Display the IPv6 MBGP routes
received from or advertised to the
IPv6 MBGP peer or peer group.
display bgp ipv6 multicast routing-table peer
ipv6-address { advertised-routes | received-routes }
[ network-address prefix-length | statistic ] [ | { begin |
exclude | include } regular-expression ]
Available in
any view
Display IPv6 multicast routing
information matching an AS
regular expression.
display bgp ipv6 multicast routing-table
regular-expression as-regular-expression
Available in
any view
Display IPv6 MBGP routing
statistics.
display bgp ipv6 multicast routing-table statistic [ |
{ begin | exclude | include } regular-expression ]
Available in
any view
Display the IPv6 MBGP routing
table information.
display ipv6 multicast routing-table [ verbose ] [ |
{ begin | exclude | include } regular-expression ]
Available in
any view
Display the multicast routing
information of the specified
destination address.
display ipv6 multicast routing-table ipv6-address
prefix-length [ longer-match ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in
any view
Resetting IPv6 MBGP connections
When you change an IPv6 MBGP routing policy, you can make the new configuration effective by
resetting the IPv6 MBGP connections.
Task Command Remarks
Reset the specified IPv6
MBGP connections.
reset bgp ipv6 multicast { as-number |
ipv6-address [ flap-info ] | all | group
ipv6-group-name | external | internal }
Available in user view
Clearing IPv6 MBGP information
Task Command Remarks
Clear dampened IPv6 MBGP
routing information and release
suppressed routes.
reset bgp ipv6 multicast dampening
[ ipv6-address prefix-length ]
Available in user view
Clear IPv6 MBGP route flap
statistics.
reset bgp ipv6 multicast flap-info
[ ipv6-address/prefix-length | regexp
as-path-regexp | as-path-acl
as-path-acl-number ]
Available in user view
IPv6 MBGP configuration example
Network requirements
As shown in the following figure:
• IPv6 PIM-SM 1 is in AS 100, and IPv6 PIM-SM 2 is in AS 200. OSPFv3 is the IGP in the two ASs,
and IPv6 MBGP runs between the two ASs to exchange IPv6 multicast route information.