IPsec/Firewall
Use this page to configure and view the IPsec (Internet Protocol security) or Firewall policy for the print
server. You can enable or disable IPsec/Firewall operation on the print server, and configure the
default rule for IP packets that are not covered by IPsec/Firewall rules.
Rules that define the IPsec/Firewall policy are configured through an IPsec/Firewall wizard, which is run
when you click Add Rules. For more information, see
IPsec/Firewall Configuration (V.36.xx)
on page 97.
Network Statistics
This page is used to display counter values and other status information currently stored on the HP
Jetdirect print server. This information is often useful to diagnose performance and operational problems
associated with the network or network device.
Protocol Info
This page provides a list of various network configuration settings on the HP Jetdirect print server for
each protocol. Use these lists to validate your desired settings.
Configuration Page
This page provides a view of the HP Jetdirect configuration page that contains a summary of HP Jetdirect
status and configuration information. The contents of this page are described in
HP Jetdirect
Configuration Pages on page 127.
Other Links
? (Help)
On Networking tab pages, click ? to display a Help page. This page provides a quick summary of the
HP Jetdirect embedded Web server features. In the Help page, links to HP support documents that
provide updated information are available (Internet access is required).
Support
The information displayed on the Support page depends on the values configured in the Support Info
on page 83 tab in the Other Settings on page 77 menu. Support information may include the name and
telephone number of a Support person, or Web links to Product and Technical Support pages. The
default Web links include HP online support and HP product information Web pages (Internet access is
required).
ENWW Other Links 95
To Next Page
Need help?
General
