HP 635n - JetDirect IPv6/IPsec Print Server - Sending Product Information to HP

NOTE: The information displayed depends on the Jetdirect print server and device. Value-
featured print servers provide limited information and capabilities.
Table 4-2 Networking Menu Items
CONFIGURATION section
●
TCP/IP Settings on page 67
●
Network Settings on page 73
●
Other Settings on page 77
●
Privacy Settings on page 83
●
Select Language on page 84
SECURITY section
●
Security: Settings on page 84
●
Authorization on page 86
●
Mgmt. Protocols on page 91
●
802.1X Authentication on page 93
●
IPsec/Firewall on page 95
DIAGNOSTICS section
●
Network Statistics on page 95
●
Protocol Info on page 95
●
Configuration Page on page 95
Sending Product Information to HP
The first time that you access the Networking tab in the embedded Web server, you will be prompted
to allow the sending of product information to HP using the Internet. Product identification and usage
data collected by HP will be used to improve product features and services. Personal data is not collected
in accordance with HP privacy policies. See the Hewlett-Packard Online Privacy Statement at
http://www.hp.com.
If you choose to decline by pressing No, a log entry to record this choice may be sent to HP. To prevent
HP from making a log entry that data collection was refused, do one of the following:
●
Disable access to the Internet before pressing No.
You can disable Internet access on your browser, for example, by disabling the Web Proxy server.
After pressing No, simply re-enable Internet access.
●
Use Telnet (IPv4) to disable this functionality before pressing No.
a. Telnet to the IP address of the Jetdirect print server.
b. If prompted for a user name and password, enter “Admin” for the user name. Then enter the
password assigned to the print server.
66 Chapter 4 Embedded Web Server (V.36.xx) ENWW