Table 8-10 Novell/NetWare Configuration Information
Message Description
STATUS Indicates the current Novell NetWare configuration status.
READY: Indicates the HP Jetdirect print server is awaiting data.
DISABLED: Indicates that IPX/SPX was manually disabled.
INITIALIZING: Indicates that the print server is registering the node address or name.
An additional status message may also be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
Table 8-13 Error Messages on page 140.
NODE NAME Queue Server Mode: The print server name. This name must match a valid print server
on the appropriate NetWare file server. The default name is NPIXXXXXX, where
XXXXXX is the last six digits of the LAN hardware (MAC) address.
Remote Printer Mode: The name you gave the network printer when you configured the
network printer. The default name is NPIXXXXXX.
The mode used by the HP Jetdirect print server.
QUEUE SERVER: Indicates that the print server receives data directly from the queue.
REMOTE PRINTER (followed by the printer number): Indicates that the print server
emulates a Novell NetWare remote printer.
If the printer is not configured, this field displays QUEUE SERVER.
NDS TREE NAME Displays the name of the Novell Directory Services (NDS) tree for this printer. NDS is
a database of objects on a NetWare network organized in a hierarchical tree structure.
Not Specified or blank: NDS is disabled.
NDS CONTEXT Displays the fully qualified NDS name where the HP Jetdirect print server object resides
in the NDS tree. For example:
CN=lj_pserver.OU=support.OU=mycity.OU=mycompany
Not Specified or blank: NDS is disabled.
ATTACHED SERVER The Attached Server field identifies the Jetdirect discovery method [NSQ] (Nearest
Service Query) or [GSQ] (General Service Query) and the name of the proxy file server
used to locate the configured bindery servers.
Not Specified or blank: A NetWare server has not been configured.
QUEUE POLL INTERVAL (Job Poll Interval) Specifies the time interval (seconds) that the HP Jetdirect print server
waits to check for print jobs in a print queue. The default is 2 seconds.
SAP INTERVAL Specifies the time interval (seconds) that the HP Jetdirect print server waits between
Service Advertising Protocol (SAP) broadcasts on the network. The default is 60
seconds.
ATTACHED SERVER Identifies a NetWare file server to which the HP Jetdirect print server is attached.
AppleTalk Protocol Information
Information in this section of the Jetdirect configuration page (Ethernet Only) is described in Table
8-11 AppleTalk Configuration Information on page 139. For error messages, see Table 8-13 Error
Messages on page 140.
138 Chapter 8 HP Jetdirect Configuration Pages ENWW
To Next Page
Loading...
Need help?
General
