Figure 8-2 HP Jetdirect Security Page
The parameters in each section of the Security page are described below.
Security Settings
This section on the Security page provides similar information that is located on the standard HP
Jetdirect configuration page. See the table below.
Table 8-14 Security Settings Messages
Message Description
802.1X Identifies whether the print server has been configured with EAP/802.1X client
authentication settings.
EAP-TLS: 802.1X EAP-TLS has been configured.
EAP-PEAP: 802.1X EAP-PEAP has been configured.
Specified: An 802.1X authentication protocol other than EAP-TLS/EAP-PEAP has been
configured.
Not Specified: 802.1X authentication has not been configured.
IPsec Provides the print server's current IPsec status.
Enabled: IPsec is enabled and operating as configured by the user.
ENWW HP Jetdirect Security Page 147
To Next Page
Loading...
