EasyManuals Logo
Home>HP>Print Server>635n - JetDirect IPv6/IPsec Print Server

HP 635n - JetDirect IPv6/IPsec Print Server User Manual

HP 635n - JetDirect IPv6/IPsec Print Server
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
IPsec Error Log
This section provides IPsec error messages contained in the following table.
Table 8-15 IPsec Error Log
Message Description
Deprecated Template A Service template that was created using a prior Jetdirect firmware version has been
detected. The template is in one of the following states:
The template is configured as a predefined template and available for use, but it
may not be valid. You should upgrade the Jetdirect firmware to the most recent
version.
The template has been saved as a custom service template. In addition, the
template may have been replaced by a new predefined version available for your
use. Review your IPsec/Firewall policy and ensure the appropriate Service
templates are being used.
Upgrade Jetdirect Firmware You should upgrade the firmware version on your HP Jetdirect print server.
Local IP Addresses
This section lists the IPv4 and IPv6 addresses configured on the print server.
IPsec Stats
IPsec statistics gathered and reported by the print server are described below.
Table 8-16 IPsec Statistics
Message Description
Fragmentation Errors Displays the number of fragmented packets that could not be reassembled.
ESP MAC Errors Displays the number of Encapsulating Security Payload (ESP) Message Authentication
Code (MAC) errors. MAC is used to verify packet integrity, that is, the message received
is the same as the one sent.
AH MAC Errors Displays the number of Authentication Header (AH) Message Authentication Code
(MAC) errors. MAC is used to verify packet integrity, that is, the message received is
the same as the one sent.
Replay Errors Displays the number of replay attacks, where unauthorized packets are being resent.
Drop Rule If the default IPsec rule is configured to drop all non-IPsec traffic, the number of dropped
packets based on the IPsec rules is displayed. Client notification of dropped packets is
not provided.
Reject Rule Displays the number of rejected IPsec packets. Client notification of rejected packets is
provided through ICMP error messages.
No Rule Displays the number of packets received for which an IPsec policy rule is not configured.
Generic Drops Displays the number of packets dropped that are not counted by other statistics.
ESP (Rx/Tx): Displays the total number of Encapsulating Security Payload (ESP) packets received
(Rx) and transmitted (Tx) by the print server.
ENWW HP Jetdirect Security Page 149

Table of Contents

Other manuals for HP 635n - JetDirect IPv6/IPsec Print Server

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 635n - JetDirect IPv6/IPsec Print Server and is the answer not in the manual?

HP 635n - JetDirect IPv6/IPsec Print Server Specifications

General IconGeneral
BrandHP
Model635n - JetDirect IPv6/IPsec Print Server
CategoryPrint Server
LanguageEnglish

Related product manuals