HP 635n - JetDirect IPv6/IPsec Print Server User Manual

Table 8-6 TCP/IP Configuration Information
Message Description
IPv4
and
IPv6
Provides current status of IPv4 and IPv6 protocols on the print server:
Enabled: the protocol is turned on.
Disabled: the protocol is turned off.
HOST NAME The host name configured on the print server. It may be truncated.
Not Specified: Indicates that no host name was specified in a BOOTP response or TFTP
configuration file.
NPIxxxxxx: The default name is NPIxxxxxx, where xxxxxx represents the last six digits
of the LAN hardware (MAC) address.
IPV4 DOMAIN NAME The Domain Name System (DNS) name of the IPv4 domain in which the HP Jetdirect
print server resides (for example, support.company.com). It is not the fully qualified DNS
name (for example, printer1.support.company.com) because the host printer name is
not included.
Not Specified: Indicates that a domain name has not been configured on the print server.
IPV6 DOMAIN NAME The Domain Name System (DNS) name of the IPv6 domain in which the HP Jetdirect
print server resides (for example, support.company.com). It is not the fully qualified DNS
name (for example, printer1.support.company.com) because the host printer name is
not included.
Not Specified: Indicates that a domain name has not been configured on the print server.
PRIMARY DNS SERVER The IPv4 address of the Domain Name System (DNS) server.
Not Specified: Indicates that a primary DNS server has not been configured on the print
server.
SECONDARY DNS SERVER The IPv4 address of the Domain Name System (DNS) server.
Not Specified: Indicates that a secondary DNS server has not been configured on the
print server.
DNS (IPV6) The IPv6 address of one or more Domain Name System (DNS) servers.
Not Specified: Indicates that an IPv6 DNS server has not been configured on the print
server.
WINS SERVER The IP address of the Windows Internet Naming Service (WINS) server.
Not Specified: Indicates that a WINS server's IP address has not been detected or
configured.
IDLE TIMEOUT The timeout value expressed in seconds after which the print server closes an idle TCP
print data connection. Acceptable values are integers between 0 and 3600. A value of
zero turns off the timeout mechanism. The default value is 270 seconds.
IPv4 Section
The following table includes items displayed under the IPv4 section of the configuration page.
Table 8-7 IPv4 Section
Message Description
STATUS Current TCP/IPv4 status.
134 Chapter 8 HP Jetdirect Configuration Pages ENWW

HP 635n - JetDirect IPv6/IPsec Print Server Specifications

General

Brand	HP
Model	635n - JetDirect IPv6/IPsec Print Server
Category	Print Server
Language	English