Example: Cold Reset Using the Service Menu
To perform a cold reset on many recent HP LaserJet printers and MFPs:
1. Turn the printer on and watch for the memory count to begin.
2.
Press and hold the Select
button (or the “6” button on MFPs with numeric keypads only) until
the three control panel lights (Ready, Data, Attention) blink and then remain on.
3.
Release the Select
button (or “6” button). The control panel will display Select Language.
4.
Press the down arrow
M
button (or “9” button) until Cold Reset appears.
5.
Press the Select
button (or “6” button) to perform a cold reset and then continue its power-on
sequence.
ENWW Resetting to Factory Defaults 119
To Next Page
Loading...
Need help?
General
