Although not recommended, you can use your Internet Options menu to configure your browser
to ignore security warnings if the print server is configured to operate through HTTPS. See
Mgmt.
Protocols on page 91.
4. An embedded Web server page will be displayed. The initial page displayed is typically served by
the printer/MFP device.
Operating Notes
●
If you enter or change a configuration parameter value, click Apply to enable your change, or click
Cancel to erase your change.
●
Changes to the IP address will close the connection to the embedded Web server. To re-establish
a connection, use the new IP address.
CAUTION: Changes to the IP address on the HP Jetdirect print server may result in
printing failures for clients that have been configured to print to this printer using the previous
IP address.
●
Novell NetWare networks: On the Network Settings page, use the IPX/SPX tab to configure Novell
Directory Services (NDS) Queue Server mode parameters. Note that the embedded Web server
cannot create NDS objects (print server, printer, and print queue objects) on the Novell server. To
create these objects, use a Novell NetWare utility, such as NWAdmin, or configure the IPX/SPX
stack for NDS through HP utilities, such as HP Web Jetadmin.
HP Jetdirect Home Tab
The Home tab will display the HP Jetdirect home page if a Web server in the attached device cannot
be accessed or does not exist. The HP Jetdirect home page displays a generic printer graphic to
represent the attached device. The HP Jetdirect print server's product model, firmware version, and
network addresses are displayed along with any device information that can be retrieved.
Table 4-1 HP
Jetdirect Home Page Items on page 64 provides a summary of the items displayed on the HP Jetdirect
home page.
NOTE: The information displayed depends on the Jetdirect print server and device. Value-
featured print servers provide limited information.
Table 4-1 HP Jetdirect Home Page Items
Item Description
Home tab Displays the Jetdirect Home page. This tab will not appear if Web pages served by the
attached device can be accessed.
Networking tab Provides access to network configuration, security, and diagnostic parameters. For more
information, see
Networking Tab on page 65.
Device Info Identifies the device (such as the model name of the printer or multifunction all-in-one
device) connected to the network through the HP Jetdirect print server.
Other information that can be retrieved from the device are also displayed (such as Page
Count, or Control Panel status). The information will vary depending on the features of the
attached device.
Select Language Appears if the HP Jetdirect Web pages support multiple languages. Supported languages
may also be selected through language preference settings in your browser.
64 Chapter 4 Embedded Web Server (V.36.xx) ENWW
To Next Page
Loading...
Need help?
General
