HP 635n - JetDirect IPv6/IPsec Print Server User Manual

Using Security Features
Access to HP Jetdirect configuration parameters can be controlled through combined use of the
available security features.
Table 6-2 Settings for Access Control on page 116 provides examples of
various settings and the associated level of access control.
Table 6-2 Settings for Access Control
Settings Level of Access Control
●
Accessible through HTTP (embedded Web server),
SNMP v1/v2c applications, or Telnet
●
Administrator password not set
●
Default SNMP v1/v2c community names used
●
No authentication or encryption
●
Access control list empty, or Firewall is disabled.
Low
Best suited for trusted environments.
Any system can access the HP Jetdirect configuration
parameters through the embedded Web server, Telnet, or
SNMP management software. Passwords are not required.
●
Administrator password set
●
User-specified SNMP v1/v2 Set Community Name set
●
The Access Control List contains host entries and checks
HTTP connections
●
Telnet and other non-secure protocols disabled.
Medium
Limited security for non-trusted environment.
If the Administrator password and SNMP v1/v2c Set
Community Name are known, access is limited to:
●
systems listed in the Access Control List, and
●
SNMP v1/v2c management applications
●
Unused protocols disabled
●
HTTPS access enabled using certificates issued by
trusted sources
●
Full-featured Jetdirect print servers configured for EAP/
802.1X server-based authentication and encryption
●
Full-featured Jetdirect print servers with SNMP v3
enabled, SNMP v1/v2c disabled
●
Telnet disabled
●
Passwords set
●
The Access Control List contains specified entries and
HTTP connections are checked
●
Printer control panel locked
●
IPsec/Firewall policy is enabled and configured for use.
High
High security for non-trusted, professionally managed
environments.
Access is controlled by IPsec. Encryption provides data
privacy; network communication in plain-text is not used.
CAUTION: Power-on settings (for example,
configurations from a BootP/TFTP or DHCP/TFTP
server) may change the print server's settings when it
is power-cycled. Be sure to confirm your intended
power-on settings.
116 Chapter 6 Security Features (V.36.xx) ENWW

HP 635n - JetDirect IPv6/IPsec Print Server Specifications

General

Brand	HP
Model	635n - JetDirect IPv6/IPsec Print Server
Category	Print Server
Language	English