Config Server
(Read-only parameter) The IP address of the server (such as a BOOTP or DHCP server)
that last configured the IP address on the HP Jetdirect print server.
TFTP Server
(Read-only parameter) The IP address of the TFTP server that provided TFTP parameters
to the HP Jetdirect print server.
TFTP Filename
(Read-only parameter) The path and TFTP filename on the TFTP server. For example,
hpnp/printer1.cfg
domain-name The domain name for the device. For example,
domain-name support.hp.com
assigns support.hp.com as the domain name.
The domain name does not include the host name; it is not the Fully Qualified Domain
Name (such as printer1.support.hp.com).
pri-dns-svr
IP address of the primary DNS (Domain Name System) server.
sec-dns-svr
IP address of a secondary DNS server to use if the primary DNS server is unavailable.
pri-wins-svr
The IP address of the primary Windows Internet Naming Service (WINS) server, in dotted
notation.
sec-wins-svr
The IP address of the secondary Windows Internet Naming Service (WINS) server, in
dotted notation.
TCP/IP Print Options
9100-printing
Enables or disables printing to TCP port 9100 on the print server.
0 disables,
1 (default) enables.
ftp-printing
Enables or disables the ability to print through FTP (TCP ports 20, 21).
0 disables.
1 (default) enables.
ipp-printing
Enables or disables the ability to print using IPP (TCP port 631).
0 disables.
1 (default) enables.
lpd-printing
Enables or disables the ability to print using LPD (TCP port 515).
0 disables.
1 (default) enables.
banner Enables or disables printing an LPD banner page.
0 disables banner pages.
1 (default) enables banner pages.
ipp-job-acct
Enable or disable job accounting for IPP printing.
0 disables.
1 (default) enables.
Table 3-3 Telnet Commands and Parameters (continued)
46 Chapter 3 TCP/IP Configuration ENWW
To Next Page
Loading...
