Web JetAdmin URL
(Read-only parameter) If HP Web Jetadmin discovers this device, the URL to access HP
Web Jetadmin will be specified.
Web JetAdmin Name
(Read-only parameter) If HP Web Jetadmin discovers this device, the name of the HP Web
Jetadmin host will be specified (if known).
support-contact
Typically used to identify the name of a person to contact for support of this device.
support-number
Typically used to specify a phone or extension number to call for support of this device.
support-url
A Web URL address for product information on this device over the Internet or an intranet.
tech-support-url
A Web URL address for technical support over the Internet or an intranet.
Menu Interface
An optional Menu interface is displayed when you type the menu command during a Telnet session with
the HP Jetdirect print server. The Menu interface eliminates the need to memorize commands, and
provides structured menu lists for easy access to configuration parameters.
Figure 3-1 Example: Using the Menu Interface on page 58 illustrates the Menu interface, using the
TCP/IP menus as an example.
●
From the Main Menu screen, select and enter a menu number. If there are submenus, select and
enter a submenu number.
●
If you want to change a parameter setting, enter “Y” (for “Yes”) when prompted.
Changes to parameters are made by editing the setting through the use of the Backspace key. If
an unrecognized value is entered, the correct entry options will be displayed.
NOTE: Changes are not saved on the Jetdirect print server until you exit a menu and, when
prompted, choose to save your changes.
Table 3-3 Telnet Commands and Parameters (continued)
ENWW IPv4 Configuration 57
To Next Page
Loading...
Need help?
General
