HP 8712ES - Page 502

8 Index
Index
memory or disk recall, 4-60
MENU key
, 8-55
MHz key
, 8-56
Min Limit key
, 8-56
min search
, 4-7
Min Search key
, 8-56
mismatch errors
, 6-4
how to reduce
, 5-15
Mixer key
, 8-56
Mkr > Max key
, 8-57
Mkr > Min key
, 8-58
Mkr Annot ON off key
, 8-56
Mkr Limit on OFF key
, 8-57
Mkr Limits
, 4-32
Mkr Limits key
, 8-57
Mkr Number ON off key
, 8-57
Mkr Symbol ON off key
, 8-57
Mkr Table Only key
, 8-57
MM-DD-YYYY-HH
MM key
, 8-58
Mod Kit SaveRecall key
, 8-58
Modify (connector type) key
, 8-
58
modify calibration kit
, 8-58
DUT has different connector
types
, 3-35
DUT has same connector
types
, 3-29
Modify Size key
, 8-58
monitor
adjustments
, 4-89
external
, 4-87, 7-12
synchronization
, 4-89
Monochrome key
, 8-58
Monochrome Pen key
, 8-59
Mount NFS key
, 8-59
MS-DOS formatting
, 4-67
Multi Notch key
, 8-59
Multi Peak key
, 8-59
multi-notch marker search
, 4-14
multi-peak marker search
, 4-14
multi-pin connectors
, 7-7, 7-14
Multiport on OFF key
, 8-59
N
Narrow 250 Hz key
, 8-60
narrow bandwidth
, 5-10
narrowband detection mode
, 3-5
Narrowband Internal key
, 8-60
narrowband power
measurement
, 3-56
Next Min Left key
, 8-60
next min left marker search
, 4-8
Next Min Right key
, 8-60
next min right marker search
, 4-
8
Next Peak Left key
, 8-61
next peak left marker search
, 4-8
Next Peak Right key
, 8-61
next peak right marker search
,
4-8
NFS Device key
, 8-61
NFS Device Setup key
, 8-60, 8-
61
NFS Device Table key
, 8-61
noise floor reduction
, 5-10
noise, trace
activating averaging
, 5-12
changing system bandwidth
, 5-
12
eliminating receiver spurious
responses
, 5-13
reduction
, 5-12
None key
, 8-62
noninsertable devices,
calibrating for
, 3-25
Non-Vol RAM Disk key
, 8-61
non-volatile memory
battery powered
, 11-13
normalization calibration
, 6-14
normalize
, 6-14
Normalize key
, 8-62
notch
, 4-13
Notch key
, 8-62
Number of Points key
, 8-62
numbering convention for S-
parameters
, 3-9
Numeric key, 8-62
O
one-port calibration. See
calibration, user one-port
Open key
, 8-63
open, calibration standard
,6-26,
8-63
Operating Parameters key
, 8-63
operational check
, 2-10
operator's check
, 2-10
operator's check, failure
, 2-10
optimizing measurements
, 5-2
Optional Boot Host key
, 8-63
Optional File Name key
, 8-63
P
page protection
, 4-74
panel
front and rear
, 7-25
panel, front and rear
, 7-2
parallel port
, 1-11, 4-71, 4-72
Parameters Received key
, 8-64
part number
rack kit
, 1-16
static-safe equipment
, 1-8
parts supplied with shipment
, 1-
3
pass/fail indicator
, 4-37, 4-38, 4-
51
Password key
, 8-64
Path FWD rev key
, 8-64
PCL5 setup
, 4-73
peak tracking
, 4-43
peak-to-peak ripple, marker
limit test
, 4-33
Perform Ping key
, 8-64
Perform Secure key
, 8-64
peripherals, connecting
, 1-11
Phase key
, 8-64
Phase Offset key
, 8-65
phase-derived delay
, 3-69