HP A5120 EI Series

HP A5120 EI Switch Series
Layer 3 - IP Services
Command Reference
Abstract
This document describes the commands and command syntax options available for the HP A Series
products.
This document is intended for network planners, field technical support and servicing engineers, and
network administrators who work with HP A Series products.
Part number: 5998-1794
Software version: Release 2208
Document version: 5W100-20110530

HP A5120 EI Series Specifications

General

Brand	HP
Model	A5120 EI Series
Category	Switch
Language	English

Summary

Gratuitous ARP configuration commands

gratuitous-arp-learning enable

Enables learning of gratuitous ARP packets.

gratuitous-arp-sending enable

Enables switch to send gratuitous ARP packets upon receiving requests.

IP addressing configuration commands

display ip interface

Displays IP configuration information for a Layer 3 interface.

ip address

Assigns an IP address and mask to an interface.

DHCP server configuration commands

dhcp enable

Enables the DHCP server.

dhcp server ip-pool

Creates a DHCP address pool and enters its view.

display dhcp server statistics

Displays the statistics of the DHCP server.

DHCP snooping configuration commands

dhcp-snooping

Enables DHCP snooping.

display dhcp-snooping trust

Displays information about trusted ports.

IPv4 DNS configuration commands

display dns server

Displays the IPv4 DNS server information.

dns server

Specifies a DNS server.

IP performance optimization configuration commands

display fib

Displays FIB entries.

display ip statistics

Displays statistics of IP packets.

IPv6 basics configuration commands

display ipv6 interface

Displays the IPv6 information of an interface.

ipv6 address

Configures an IPv6 global unicast address for an interface.

DHCPv6 configuration commands

display ipv6 dhcp pool

Displays DHCPv6 address pool information.

ipv6 dhcp server enable

Enables the DHCPv6 server.

DHCPv6 relay agent configuration commands

display ipv6 dhcp relay server-address

Displays information about DHCPv6 server addresses on the relay agent.

ipv6 dhcp relay server-address

Enables DHCPv6 relay agent and specifies a DHCPv6 server.

DHCPv6 client configuration commands

display ipv6 dhcp client

Displays DHCPv6 client information.

DHCPv6 snooping configuration commands

ipv6 dhcp snooping enable

Enables DHCPv6 snooping globally.

ipv6 dhcp snooping trust

Configures a DHCPv6 trusted port.