101
Syntax
display stp bpdu-statistics [ interface interface-type interface-number [ instance instance-id ] ] [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the BPDU statistics on a specified port, where
interface-type interface-number indicates the port type and number.
instance instance-id: Displays the BPDU statistics of a specified MSTI on a specified port. The value of
instance-id is in the range of 0 to 31, where 0 represents the CIST.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# In MSTP mode, display the BPDU statistics of all MSTIs on GigabitEthernet 1/0/1.
<Sysname> display stp bpdu-statistics interface gigabitethernet 1/0/1
Port: GigabitEthernet1/0/1
Instance-independent:
Type Count Last Updated
--------------------------- ---------- -----------------
Invalid BPDUs 0
Looped-back BPDUs 0
MAX-aged BPDUs 0
TCN sent 0
TCN received 0
TCA sent 0
TCA received 2 10:33:12 01/13/2010
Config sent 0
Config received 0
RST sent 0
RST received 0
MST sent 4 10:33:11 01/13/2010
MST received 151 10:37:43 01/13/2010
Instance 0:
To Next Page
Loading...
Need help?
General