HP A5830 Series Command Reference

232
link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
location-id { civic-address device-type country-code { ca-type ca-value }&<1-10> | elin-address tel-number
} | network-policy | power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-
name } | dot1-tlv { all | port-vlan-id | protocol-vlan-id | vlan-name } | dot3-tlv { all | link-aggregation
| mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | location-id |
network-policy | power-over-ethernet } }
In Layer 3 Ethernet interface view:
lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name
} | dot3-tlv { all | link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability
| inventory | location-id { civic-address device-type country-code { ca-type ca-value }&<1-10> | elin-
address tel-number } | power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-
name } | dot3-tlv { all | link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all |
capability | inventory | location-id | power-over-ethernet } }
View
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default level
2: System level
Parameters
all: Advertises all basic LLDP TLVs, IEEE 802.1 organizationally specific LLDP TLVs, or IEEE 802.3
organizationally specific LLDP TLVs when the all parameter is specified for basic-tlv, dot1-tlv, or dot3-tlv in
Layer 2 Ethernet interface view; advertises all basic LLDP TLVs or IEEE 802.3 organizationally specific
LLDP TLVs when the all parameter is specified for basic-tlv or dot3-tlv in Layer 3 Ethernet interface view;
or advertises all LLDP-MED TLVs except location identification TLVs when the all parameter is specified for
med-tlv, regardless of whether in Layer 2 or Layer 3 Ethernet interface view.
basic-tlv: Advertises basic LLDP TLVs.
port-description: Advertises port description TLVs.
system-capability: Advertises system capabilities TLVs.
system-description: Advertises system description TLVs.
system-name: Advertises system name TLVs.
dot1-tlv: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
port-vlan-id: Advertises port VLAN ID TLVs.
protocol-vlan-id: Advertises port and protocol VLAN ID TLVs.
vlan-name: Advertises VLAN name TLVs.
vlan-id: Specifies a VLAN ID in the TLVs to be advertised. The parameter ranges from 1 to 4094 and
defaults to the least VLAN ID on the port.
dot3-tlv: Advertises IEEE 802.3 organizationally specific LLDP TLVs.
link-aggregation: Advertises link aggregation TLVs.
mac-physic: Advertises MAC/PHY configuration/status TLVs.

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English