EasyManua.ls Logo

HP Engage Flex Pro G2 - Specifications

HP Engage Flex Pro G2
117 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications12
This section provides specifications for your computer.
Table 12-1 Specifications
Metric U.S.
Dimensions
Height 337 mm 13.27 in
Width 384 mm 15.12 in
Depth 100 mm 3.94 in
Approximate weight 4.7 kg 10.4 lb
Temperature range
Operating 10°C to 40°C 50°F to 104°F
Nonoperating –30°C to 65°C 22°F to 149°F
Maximum altitude (unpressurized)
Operating 3,048 m 10,000 ft
Nonoperating 9,144 m 30,000 ft
Relative humidity (noncondensing)
Operating 20% to 85%
Nonoperating (38.7°C max wet bulb) 0% to 95%
Power supply 250 W
Operating voltage range 90 V AC to 264 V AC
Rated voltage range
1
100 V AC to 240 V AC
Rated line frequency 50 Hz to 60 Hz
Operating line frequency 47 Hz to 63 Hz
1
This system uses an active power factor-corrected power supply. This allows the system to pass the CE mark requirements for
use in the countries of the European Union. The active power factor-corrected power supply also has the added benefit of not
requiring an input-voltage range select switch.
NOTE: Operating temperature is derated 1.0°C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea
level; no direct sustained sunlight. Maximum rate of change is 10°C/Hr. The upper limit might be limited
by the type and number of options installed.
Specifications
107

Table of Contents