EasyManua.ls Logo

HP Engage Flex Pro G2 - Page 95

HP Engage Flex Pro G2
117 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 6-3 Interpreting POST diagnostic front panel lights and audible codes (continued)
Category Major/minor code Description
Thermal 4.2 A processor over temperature condition has been detected.*
4.3 An ambient temperature over temperature condition has been
detected.
4.4 An MXM over temperature condition has been detected.
System board 5.2 The embedded controller cannot find valid firmware.
5.3 The embedded controller has timed out waiting for the BIOS.
5.4 The embedded controller has timed out waiting for BIOS to return
from system board initialization.
5.5 The embedded controller rebooted the system after a possible
lockup condition had been detected through the use of a
System Health Timer, Automated System Recovery Timer, or
other mechanism.
* Indicates a hardware-triggered event; BIOS controls all other events.
88 Chapter 6 POST error messages

Table of Contents

Related product manuals