Finish the replacement
The following steps provide the complete procedure for this topic.
1. Close the top cover.
2. Ensure that all windows, covers, and doors are closed and remain in their original positions.
Replace the bottom glass of the heating lamps
The following sections provide details for this topic.
Prepare for replacement
1. Ensure that the printer is not printing.
2. Turn off the printer.
3. If a job has just been printed, wait about 20 minutes for the printer to cool down.
4. You are recommended to wear gloves.
5. Ensure that all windows, covers, and doors are closed and remain in their original positions.
Remove the bottom glass of the heating lamps
The following steps provide the complete procedure for this topic.
■
See Remove the bottom glass of the heating lamps on page 200.
Finish the replacement
The following steps provide the complete procedure for this topic.
1. Close the top cover.
2. Ensure that all windows, covers, and doors are closed and remain in their original positions.
Replace a fusing-lamp external glass
The following sections provide details for this topic.
Prepare for replacement
The following steps provide the complete procedure for this topic.
1. Ensure that you have the fusing lamp glass kit.
2. Ensure that the printer is not printing.
3. If a job has just been printed, wait about 20 minutes for the printer to cool down.
4. You are recommended to wear gloves and mask.
5. Ensure that all windows, covers, and doors are closed and remain in their original positions.
6. Turn off the printer.
Remove the fusing-lamp module
The following steps provide the complete procedure for this topic.
258 Chapter 11 Hardware maintenance
To Next Page
Loading...