Table 11-22 Warning labels
Risk of burns Crush hazard Risk of trapped
fingers
Hazardous moving
part
Light radiation
hazard
Electric shock
hazard
For more safety information, see Safety precautions on page 4
■
See Remove the fusing-lamp module on page 127.
Replace the fusing-lamp external glass
The following steps provide the complete procedure for this topic.
1. Turn the assembly upside down and unscrew the four screws of the exterior glass frame.
2. Carefully remove the frame of the exterior glass.
CAUTION: When you remove the frame, the glass may stick to it. Take care that the glass does not
f
all out of the frame as you pick it up.
3. Remove the exterior glass and dispose of it according to local regulations.
Replace the fusing-lamp external glass 259
To Next Page
Loading...