Replace the sieve mesh
You may sometimes decide to replace the mesh if there is material stuck in it that cannot be removed by
cleaning. F
ollow the same steps as in the reference below, but replace the mesh with a new one, instead
of cleaning the old one.
Clean the sieve mesh on page 286
Replace an e-cabinet fan filter
The following sections provide details for this topic.
Prepare for replacement
The following steps provide the complete procedure for this topic.
1. Locate the replacement filters provided in the Processing-station maintenance kit.
2. You are recommended to wear gloves, mask, and safety goggles.
3. Ensure that all windows, covers, and doors are closed and remain in their original positions.
4. Turn off the processing station.
Replace an e-cabinet filter
The following steps provide the complete procedure for this topic.
1. Locate the e-cabinet filters.
2. Remove the plastic filter cover.
Replace the sieve mesh 293
To Next Page
Loading...