HP OmniBook xt1000 Series - To Insert or Remove a CD or DVD

Add-On Devices
Using Plug-In Modules
70 Reference Guide
To insert or remove a CD or DVD
CAUTION
Do not remove a CD or DVD while the notebook is reading it. Otherwise, the
notebook could stop responding and you could lose data. Before opening the drive,
make sure the drive is not running by pressing the multimedia Stop button (if
available) or using the stop or eject control in your multimedia player software.
Be sure to press the CD or DVD onto the spindle. You can damage the disk or
drive if you just lay it on the tray.
1. Press the button on the face of the drive. (If you are using this drive for the first time,
be sure to remove the cardboard packing insert.)
2. Place the disk into the drive (label facing up) and gently press down until the disk
snaps onto the spindle.
–or–
Remove the disk.
3. Slide the tray back into the drive to close it.