Troubleshooting and Maintenance
Configuring the Notebook
118 Reference Guide
Configuring the Notebook
Your notebook includes two tools that help you configure its operation: the BIOS
configuration utility and HP Toptools.
To run the BIOS configuration utility
The BIOS (Basic Input and Output System) configuration utility enables you to make
changes to the notebook’s system configuration, and to tailor the operation of your
notebook to your individual work needs.
The settings made in the BIOS configuration utility generally control the notebook’s
hardware, and so greatly affect how the notebook operates.
1. Restart the notebook: click Start, Turn Off Computer, Restart.
2. When the HP logo appears, press F2 to enter the BIOS configuration utility.
3. The pointing devices are not active in the BIOS configuration utility, so you will need
to use the keyboard to navigate:
?? Press the left and right arrow keys to move among menus.
?? Press the up and down arrow keys to move among parameters in a menu.
?? Press Enter to open the dialog for the current parameter, or to select the parameter.
?? Press Tab or the left and right arrow keys to move among selections in a dialog.
?? Press the up and down arrow keys to move through values for the setting.
?? Press Enter to close the dialog and accept the settings.
4. After you select the options you want, use the Exit menu to exit the BIOS
configuration utility.
The following tables describe the settings for BIOS version 1.00. If your BIOS version is
different, some settings may differ from those shown or may be absent.
To Next Page
Loading...
