HP OmniBook xt1000 Series User Manual

Add-On Devices
Connecting PC Cards
76 Reference Guide
Connecting PC Cards
The notebook’s PC Card slot is available for storing data and expanding the
communication capabilities of the notebook. The notebook supports one standard Type II
or Type III PC Card (PCMCIA and CardBus). Zoomed Video cards are not supported.
To insert or remove a PC Card
Inserting a PC Card
1. Hold the PC Card with its face up and its connector holes toward the card slot.
2. Slide the PC Card all the way into the lower slot, until its outer edge is flush with the
casing of the notebook. Most cards are properly seated when the outer edge is flush
with the casing of the notebook, but some cards are designed to protrude from the
case.

HP OmniBook xt1000 Series Specifications

General

Display Size	14.1 inches
Battery Life	Up to 3 hours
Wireless	Optional 802.11b
Display Resolution	1024 x 768
Operating System	Windows XP
Weight	2.4 kg (5.3 lbs)
Optical Drive	CD-ROM or DVD-ROM
Ports	USB, VGA, Parallel, Serial, PS/2, Audio
Networking	10/100 Ethernet
Storage	20 GB HDD