HP ProCurve 2510-24 User Manual

7-4
Interface Access and System Information
Interface Access: Console/Serial Link, Web, and Telnet
Menu: Modifying the Interface Access
The menu interface enables you to modify these parameters:
■ Inactivity Time-out
■ Inbound Telnet Enabled
■ Web Agent Enabled
To Access the Interface Access Parameters:
1. From the Main Menu, Select...
2. Switch Configuration...
1. System Information
Figure 7-1. The Default Interface Access Parameters Available in the Menu Interface
2. Press
[E] (for Edit). The cursor moves to the System Name field.
3. Use the arrow keys ([v], [^], [<], [>]) to move to the parameters you want
to change.
Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
[Enter], then press [S] (for Save).
Interface Access
Parameters

HP ProCurve 2510-24 Specifications

General

Model	HP ProCurve 2510-24
Switching Capacity	8.8 Gbps
Layer	Layer 2
Form Factor	Rack-mountable
MAC Address Table Size	8000 entries
Jumbo Frame Support	Yes
Power	AC 120/230 V (50/60 Hz)
Management	Web, SNMP, CLI
Features	VLAN support, QoS
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature	0 to 40 °C
Operating Humidity	15% to 95% (non-condensing)
Dimensions	44.25 x 17.3 x 4.45 cm