To Next Page

To Previous Page

9-15

Time Protocols

TimeP: Viewing, Selecting, and Configuring

Menu: Viewing and Configuring TimeP

To View, Enable, and Modify the TimeP Protocol:

1. From the Main Menu, select:

2. Switch Configuration...

1. System Information

Figure 9-9. The System Information Screen (Default Values)

2. Press

[E] (for Edit). The cursor moves to the System Name field.

3. Use [v] to move the cursor to the Time

Sync Method field.

4. If

TIMEP is not already selected, use the Space bar to select TIMEP, then

press [v] once to display and move to the TimeP

Mode field.

5. Do one of the following:

• Use the Space bar to select the DHCP mode, then press [v] to move

the cursor to the Poll

Interval field, and go to step 6.

Time Protocol Selection Parameter

– TIMEP (the default)

–SNTP

– None

Other manuals for HP ProCurve 2510-24

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2510-24 and is the answer not in the manual?

General